Asko DW70.3 - Page 20

20
DW70.3
Panel type DW70.3, L = LED, S = Push button,
Variant settings
When the power is switched on for the first time
after replacing the control unit, the variant settings
menu is displayed.
1. Press the Program button (S1) until the desired
variant is selected:
L1 flashes:
Variant1 = Time saver
L2 flashes:
Variant2 = Super rinse option
L3 flashes:
Variant3 = Tab
2. Confirm your selection by pressing Start (S2).
The machine detects the presence of a turbid-
ity sensor, a pressure sensor and a spray arm di-
verter. The program returns to the main menu.
To return to the variant settings menu:
1. Turn off the main power switch (I/0)
2. Wait at least 5 seconds
3. Press and hold the Program and Start buttons
(S1 and S2)
4. Switch on the main power switch (I/0)
5. Release the Program and Start buttons (S1 and
S2). Proceed to step 6 within five sec-
onds.
6. Press Start (S2) three times in quick succession.
L1, L2 or L3 flashes according to the previously
selected variant setting
7. Use the Program button (S1) to select a variant
8. Confirm your selection by pressing Start (S2).
The program returns to the main menu.
Water hardness setting
Activating the settings menu:
1. Turn off the main power switch (I/0)
2. Wait at least 5 seconds
3. Press and hold the Start button (S2)
4. Switch on the main power switch (I/0)
5. Release the Start button (S2)
6. Use the Program button (S1) to select the de-
sired water hardness.
Setting: Water hardness [°dH]
All LEDs unlit0-5
(also applies to machines without water softener)
L1 lit 6-8
L1-2 lit 9-14
L1-3 lit 15-19
L1-4 lit 20-29
L1-5 lit 30-44
L1-6 lit 45+
7 Confirm your selection by pressing Start (S2).
The program returns to the main menu.
Activating of Super rinse (Variant 1 and 3; S7)
Activating the settings menu:
1. Turn off the main power switch (I/0)
2. Wait at least 5 seconds
3. Press and hold the button (S7)
4. Switch on the main power switch (I/0)
5. Release the button (S7)
6. Use the Program button (S1) to select the de-
sired status
L1 unlit: Super rinse deactivated
L1 lit: Super rinse activated
7. Confirm your selection by pressing Start (S2).
The program returns to the main menu.
S 1
L 1 L 2
L 3
L 4 L5
L 6
S 3
S 4
S 5
S 6 S 7
S 2
L 7
L 8
L 1 2
L 1 3
L 1 4
L 1 6L 1 5
L 1 7
L 1 0
L 1 1
IR
PROGRAMS AND CONTROL UNIT