Asko DW70 - Page 21

21
Child safety catch
Activating the settings menu:
1. Turn o the main power switch (I/0)
2. Wait at least 5 seconds
3. Press and hold the temperature and drying op-
tion buttons (S4 and S6)
4. Switch on the main power switch (I/0)
5. Release the temperature and drying option
buttons (S4 and S6)
6. Use the Program button (S1) to select the sta-
tus
L1 unlit: Child safety catch deactivated
L1 lit: Child safety catch activated
Conrm your selection by pressing Start (S2). The
program returns to the main menu.
Temporary deactivation of the Child safety catch is
achieved by pressing the temperature (S4) and dry-
ing (S6) option buttons together.
Total reset
To reset the machine to its factory settings.
1. Turn o the main power switch (I/0)
2. Wait at least 5 seconds
3. Press and hold the Program button (S1)
4. Switch on the main power switch (I/0)
5. Release the Program button (S1).
The machine will reset various settings, although not
water hardness, variant setting and intake volume.
The machine detects the presence of a turbidity
sensor, a pressure sensor and a spray arm diverter.
The machine then automatically returns to the main
menu.
PROGRAMS AND CONTROL UNIT