ActionPossible causesProblem
Press and hold Start/Stop until
the display shows "Program
started, close door".
The Start/Stop start button has
been pressed for too short a
time.
The dishwasher does not start.
Check.The door is not properly closed.
Close the door and wait. After a
while, the dishwasher continues
the program.
You have opened the
dishwasher to add more dishes
while a program is in progress.
Check.A fuse/circuit breaker has been
tripped.
Check.The plug is not plugged into the
wall socket.
Check.The water tap is turned off.
Check.Overflow/leaks.
Turn off the water tap. Pull out
the plug and call the service
department.
A whirring sound (the drainage
pump) is heard from the
dishwasher and does not stop
when the main power switch is
turned off.
Table continued from last page
30
Troubleshooting
To Next Page
Loading...
Need help?
General
