EN 25
Removal and installation of the oven door
Keep your fingers away from the hinges of the oven door. The hinges are spring loaded and can
cause injury if they spring back. Make sure that the hinge latches are applied correctly to lock the
hinges.
Remove the oven door
B
A
C
1. Open the door to the fully open position.
2. Lift both hinge latches (A) and pull them towards the oven door (B). The hinges will be
locked in the 45° position.
3. Gently close the door until it reaches a 45° angle.
4. Remove the door by lifting and tilting it towards the oven (C). The hinges need to come out
of the slots in the oven.
Install the oven door
1. Hold the door at an angle of approximately 45° in front of the oven.
2. Insert the hinges into the slots and make sure they are both positioned correctly.
3. Open the door to the fully open position.
4. Lift both hinge latches and move them towards the oven.
5. Gently close the oven door and make sure that it closes correctly. If the door does not open
or close correctly, then make sure that the hinges are positioned correctly in their slots.
MAINTENANCE
687767_en_naslovnica_drug_papir.indd EN25687767_en_naslovnica_drug_papir.indd EN25 8. 08. 2022 13:18:368. 08. 2022 13:18:36
To Next Page
Loading...
Need help?
General
