13
Putting in more washing
Turn the program knob to position 10, Drain,
to interrupt the washing program. Any water in
the machine will be pumped out. Press the
button to open the door.
Put the extra washing in, fill new detergent if
needed, close the door, set a new program and
the machine will start.
Altering settings or changing the program
Press the option buttons in/out that you wish
to alter and turn the program knob to the desi-
red program.
NOTE.
To alter the option Delayed start, you must
first turn the program knob to zero (knob poin-
ting straight upwards), then press the
5h
but-
ton and turn the program knob to the desired
program position.
6 - WASHING PROGRAM COMPLETED
Press the button and take out the washing.
7 - WHEN WASHING IS FINISHED
Turn OFF the main switch, , and close the
washer door.
To Next Page
Loading...
