Asko W6424 User Manual

Error messages
If an error occurs during the program, a message
is shown on the display. To exit the message after
taking action, turn the machine off and then back
on.
The error messages that may be shown in the
display are:
F10 Overfilling
1.
Shut off the water tap.
2.
See "Drainage error".
F11 Drainage error
Check:
•
that no objects are stuck in the drainage hose
outlet.
•
that the drain pump is not blocked by foreign
objects. Clean the pump. See the "Care and
maintenance instructions" chapter.
•
that there are no kinks in the drainage hose.
After taking action, run the Drain program or press
the Door Opening button (key symbol) to empty
the machine. If this does not resolve the problem,
call the Customer Care Center.
F12 Water Inlet Fault
Check:
•
that the tap on the water pipe is open.
•
that the filter in the machine’s water intake is
not blocked.
Action:
1.
Shut off the water tap.
2.
Unscrew the hose.
3.
Clean the filter in the intake valve on the
machine.
4.
Screw the hose back on.
5.
Turn on the tap.
6.
Run the program again to check whether the
error has been fixed.
7.
If this does not resolve the problem, call the
Customer Care Center.
Customer Care Center26
1-800-898-1879
www.askousa.com
Troubleshooting

Asko W6424 Specifications

General

Brand	Asko
Model	W6424
Category	Washer
Language	English