Before the machine is used, the three transport
screws should be removed as shown below.
1.
Loosen and remove the screws.
2.
The enclosed plastic bag contains three plastic
plugs to fit in the empty screw holes.
Note!
If the machine is to be moved and transported,
the transport screws must be refitted to prevent
damage to the machine through shaking. If the
transport screws or plastic plugs have been lost,
you can order new ones from your retailer.
DesignationArticle number
Screw80 882 77
Plastic plug80 884 67
Order three of each item!
Customer Care Center28
1-800-898-1879
www.askousa.com
Transport protection
To Next Page
Loading...
Need help?
General
