You can change the following settings:
•
Child-safe Start
•
Door opening
•
Language
•
Temperature
•
Extra rinses
•
Pre-soak
•
Anti Wrinkle function
•
Clock
•
Buzzer Volume
•
Spin Option
How to choose the settings:
1.
Press the program selector (the big arrow) until the program selection menu in the display on the left
is highlighted.
2.
Then press the up or down arrow button until Settings is highlighted.
3.
Press the program selector (the big arrow).
Child-safe Start
You can activate the Child-safe Start option to prevent children from starting the machine. You can
deactivate the Child-safe Start option by pressing the Start/Stop button and the program selector (the
big arrow) at the same time. The Child-safe Start option will be temporarily deactivated for three minutes.
1. Press the up or down arrow button until Child-safe Start appears in the middle of the display.
2. Press the program selector again (the big arrow) to access the options menu on the right of the display.
3. Press the up or down arrow button to select Off or On.
4. Press the program selector to save your setting.
5. If you do not want to select any more settings, press the arrow button down until you reach the program
you want.
Door opening
The default setting is for the washer door to open automatically when the program has finished. If for any
reason you do not want the door to open automatically, you can program the machine so that the door
only opens when you press the Door Opening button (key symbol).
1.
Press the up or down arrow button until Automatic Door Opening appears in the middle of the display.
2.
Press the program selector again (the big arrow) to access the options menu on the right of the display.
3.
Press the up or down arrow button to select Off or On.
4.
Press the program selector to save your setting.
5.
If you do not want to select any more settings, press the arrow button down until you reach the program
you want.
23Customer Care Center
1-800-898-1879
www.askousa.com
Settings
To Next Page
Loading...
