27
Information for test institute
Program Max. load Temp. °C
Auto
1)
1/2
Standard cotton
2)
1/1
40
°C
60
°C
Easy Care
3)
1/2 40
1)
Short programme for test institutes, max. 1/2 load.
2)
Test programme for cold water connection in accordance with EN 60456. For large volumes of detergent we recommend removing the
insert and adding detergent directly to the detergent compartment.
3)
40 °C programme for test institutes. The 40 °C option must be selected.
Energy labelling
European test standard: EN 60456
Washing program: Standard cotton
40
°C
60
°C
, 8 kg cotton
Connection: Cold water 15°C
Test method for noise measurement: IEC-60704-2-4
Technical data
Height: 850 mm
Width: 595 mm
Depth: 585 mm
Weight: 76 kg
Cylinder volume: 60 l
Rated power: See type plate.
Heater output: See type plate.
Water pressure: 0,1-1 MPa
1-10 kp/cm
2
10-100 N/cm
2
Wash drum and liquid compartment
material:
Stainless steel
Outer casing material: Powder-coated and hot-galvanized sheet steel or stainless
steel.
Water connection: 1,5 m pex pipe
Drain: 1,7 m polypropylene hose
Technical information
To Next Page
Loading...
