Need help?Do you have a question about the Aspen LCM-Twin T38 and is the answer not in the manual?
General| Category | Control Unit |
|---|---|
| Touch Screen | Yes |
| Power Supply | 24 VDC |
| Humidity Range | non-condensing |
| Communication Ports | Ethernet |
| Display Type | TFT LCD |
Describes the LCM-1400 as a chassis-mounted cooling system.
General safety warnings including refrigerant contact, frostbite, and hot components.
Coolant, ambient operating/storage temperatures, weight, and dimensions.
Details on condenser fans, power supply, and airflow requirements.
Information on push-to-connect fittings and coolant flow.
Instructions for mounting the LCM unit using its base plate.
Voltage range, current draw, and wire gauge for 48 VDC and 24 VDC models.
Description of the thermal switch for compressor overheat protection.
Introduction to the BLDC drive, speed control, and input signals.
Performance curves for cooling capacity vs. coolant temperature.
Instructions for cleaning condenser fins to ensure efficiency.
Details of the limited warranty for Aspen products.
Procedure for obtaining warranty repairs and returning products.
Information on obtaining technical assistance and contact details.
Details on Mode 1 (Direct Replacement) and Mode 2 (Quiet Sinusoidal) operation.
Explanation of terminal connections (TB5-TB16) and recommended wiring.
Recommended fuse sizes for the condenser fan output.
Details on speed input methods (0-5V, 0-10V, 4-20mA, Frequency) for Mode 2.
Tables for selecting jumper positions for specific drive functions and compressor types.
Guide for diagnosing and resolving common drive symptoms and error codes.
To Next Page