Aspen Vista User Manual

Aspen Vista
™
Collar Pad Replacement
and Washing Instructions
Pad Washing
To wash the pads on your Vista collar, hand wash the pads with soap and water. Rinse out all soap. Gently squeeze out
excess water. Allow to air dry (6 to 8 hours typically). Do not place pads in a washer or dryer.
Pad Removal
To remove the pads on the front
piece of the collar, simply peel the
pads away from the Velcro dots that
attach them to the plastic.
To remove the pad on the back
panel, you must first unthread the
straps on each side. To do this, push
the straps through the slits in the
pad and then through the slots in the
outer edge of the plastic.

Aspen Vista Specifications

General

Product Type	Cervical Collar
Material	Polyethylene foam
Indications	Cervical spine immobilization
Adjustment	Height adjustable
X-ray, CT & MRI compatibility	Yes
Features	Adjustable height
Sizing	Universal
Size Range	Universal, Adjustable

Summary

Pad Removal and Washing Instructions

Front Pad Removal

Peel front collar pads away from Velcro dots attaching them to the plastic.

Back Pad Removal

Unthread straps through pad slits and then through outer plastic slots to remove back pad.

Pad Washing Instructions

Hand wash pads with soap and water, rinse, squeeze excess water, and air dry.

Pad Replacement Guide

Front Pad Reattachment

Align bottom (larger) front pad with Velcro dots and plastic circle component.

Upper Front Pad Placement

Ensure the upper pad covers the front and rear edges of the plastic components.

Back Pad Reattachment

Attach grey side of back pad to Velcro dots, then rethread straps through padding and plastic slots.