EasyManua.ls Logo

Aspes ACI1660B - User Manual

Aspes ACI1660B
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Read this manual carefully before operation
INSTRUCT ON MANUALI
KKKKKKK
COOKER HOOD
Pictures in this manual are for reference only, the product in kind prevail.
ACI1660B
ACI1660N
ACI1960B
ACI1960N

Questions and Answers

  • M
    Mark MartinezAug 9, 2025
    Why is my Aspes ACI1660B Ventilation Hood vibrating?
    • A
      Amber AdkinsAug 9, 2025
      Vibration in your Aspes Ventilation Hood can occur due to several reasons: * A damaged blade may cause vibration, in which case you should replace the blade. * If the motor is not tightly fastened, make sure to fasten it tightly. * If the cooker hood itself isn't tightly fixed, ensure it is properly secured.
  • T
    Thomas RandallAug 13, 2025
    What to do if my Aspes Ventilation Hood has insufficient suction?
    • T
      Tracy LeachAug 13, 2025
      If your Aspes Ventilation Hood isn't providing enough suction, it could be due to: * The distance between the hood and the cooker top being too large. Try to readjust the distance. * Excessive ventilation from open doors or windows. Consider installing the appliance in a less ventilated area or closing some doors/windows.
  • M
    mbennettAug 18, 2025
    What to do if my Aspes ACI1660B is leaking oil?
    • K
      Kristi RobinsonAug 18, 2025
      If you notice oil leaking from your Aspes Ventilation Hood, it might be because: * The outlet and air ventilation entrance aren't tightly sealed. You can take down the outlet and seal it with glue. * There's leakage from the connection of the U-shaped section and cover. Remove the U-shaped section and seal it with soap or paint.
  • C
    Christina HobbsAug 25, 2025
    How to fix an Aspes Ventilation Hood that is inclining?
    • M
      Megan DavidsonAug 25, 2025
      If your Aspes Ventilation Hood is inclining, it's likely due to: * Fixing screws not being tight enough. Tighten them and ensure the hood is horizontal. * Hanging screws not being tight enough. Tighten these screws as well, ensuring the hood is level.
  • J
    joseph46Aug 29, 2025
    What to do if the light is on but the motor doesn't work in my Aspes ACI1660B?
    • G
      gregoryclarkAug 29, 2025
      If the light is working, but the motor isn't, in your Aspes Ventilation Hood, it could be due to: * Blocked blades. * A damaged capacitor: Replace the capacitor. * A damaged motor: Replace the motor. * Cut off or disconnected internal motor wiring, which may also produce an unpleasant smell: Replace the motor.
  • H
    Holly ThompsonSep 3, 2025
    What to do if both the light and motor don't work on my Aspes ACI1660B?
    • K
      Katie BushSep 3, 2025
      If both the light and motor aren't working on your Aspes Ventilation Hood: * The light may be damaged: Replace the lights. * The power cord may be loose: Connect the wires according to the electrical diagram.

Aspes ACI1660B Specifications

General IconGeneral
Maximum extraction power650 m³/h
TypeWall-mounted
Number of speeds3
Width60 cm
Number of motors1
Control typePush button
MaterialStainless steel
Filter typeAluminum grease filter

Related product manuals