Why does my Aspes Ventilation Hood have insufficient suction?
If your Aspes Ventilation Hood isn't providing enough suction, it might be because the distance between the hood and your cooker top is too great. Try readjusting the distance. Also, too much ventilation from open doors or windows can affect suction. Consider installing the appliance in a different location or closing some doors and windows.
What to do if my Aspes ACPT600AN Ventilation Hood is vibrating?
If your Aspes Ventilation Hood is vibrating, consider these potential causes: * A damaged blade could be the culprit; if so, replace the blade. * The motor might not be tightly fastened; ensure it is securely tightened. * The cooker hood itself might not be tightly fixed; make sure it is properly secured.
How to fix an Aspes Ventilation Hood when the light is on, but the motor doesn't work?
If the light on your Aspes Ventilation Hood is on but the motor isn't working, there could be several reasons. The blades might be blocked, in which case you should check them. Alternatively, the capacitor or the motor itself may be damaged, requiring replacement. It's also possible that the internal wiring of the motor is cut off or disconnected; in this case, replace the motor.
Why is my Aspes ACPT600AN inclining?
If your Aspes Ventilation Hood is inclining, it's likely that the fixing screws or the hanging screws are not tight enough. Tighten the fixing screw and the hanging screw to make it horizontal.
How to stop oil from leaking from my Aspes ACPT600AN Ventilation Hood?
If you're experiencing oil leakage from your Aspes Ventilation Hood, the outlet and air ventilation entrance may not be tightly sealed. To resolve this, take down the outlet and seal it with glue.
General| Brand | Aspes |
|---|---|
| Model | ACPT600AN |
| Category | Ventilation Hood |
| Language | English |
To Next Page