What to do if my Aspes AGW3600N Cooktop smells like gas?
If you smell gas, stop using the product, close the middle valve, and open the window to ventilate the area. Contact our service center using a phone from outside the building, as there may be a gas leakage.
Why is my Aspes AGW3600N Cooktop flame going out during use?
The flame might be going out because the flame supervision device is contaminated, or the product being cooked has boiled over and extinguished the flame, or a strong draught may have blown the flame out. Clean the flame supervision device. If food boiled over, turn off the burner knob, wait one minute, and reignite the zone. If there's a draught, turn off the zone and check the cooking area for draughts, such as open windows, wait one minute, and reignite the zone.
Why is my Aspes Cooktop badly ignited?
Your Aspes Cooktop might be igniting poorly because the gas supply isn't fully open, the burner lid is badly assembled, the ignition plug is contaminated, the burners are wet, or the holes in the flame spreader are clogged. Open the gas supply completely, assemble the lid correctly, wipe any alien substance from the ignition plug with a dry cloth, carefully dry the burner lids, or clean the flame spreader.
How to fix yellow flame on Aspes AGW3600N Cooktop?
A yellow flame on your Aspes Cooktop may be due to clogged holes in the flame spreader or the use of a different type of gas. Clean the flame spreader or check the type of gas being used.
Why Aspes AGW3600N Cooktop is not ignited?
The cooktop may not be igniting due to no spark, a badly assembled burner lid, or a closed gas supply. Check the electricity supply, correctly assemble the lid, or open the gas supply completely.
Why does my Aspes AGW3600N make noise when combusted and ignited?
The noise during combustion and ignition could be due to a badly assembled burner lid. Ensure that the burner lid is correctly assembled.
Why is the flame unstable on my Aspes Cooktop?
An unstable flame on your Aspes Cooktop may be caused by a burner lid that is badly assembled. Make sure to assemble the burner lid correctly.
To Next Page
General