7
Adjusting Seat Depth
• Lay the chair down so the backrest is facing
the floor
• Locate the bolt on the seat frame toward
the back of the chair
• Loosen the bolt and adjust into the desired
position
• Tighten the bolt
• Stand the chair back in its upright position
• Re-adjust the seat upholstery to suit the new
seat depth
Adjusting Front Castor Height
• Using the supplied allen key loosen bolt and
remove pin
• Reposition the castor to the desired height
• Replace the pin and tighten the bolt
Adjusting Rear Wheel Axle Height
• Remove the quick release rear wheel by
pressing the black button and pulling the
wheel toward you
• Remove and re-position the axle housing
into the desired position
Transportation
• Before lifting the chair into a vehicle for
transport it is recommended to remove the
wheels with the easy push button release,
and to remove the footplates with the user
friendly clasp mechanism, in order to make
it even lighter and easier to lift.
To Next Page
Loading...
