6
3. Insert the footrests into
the top of the frame
receivers at a 90° angle
to the chair and swing
towards the centre of
the chair until the release
button engages with a
“click” sound
3. ASSEMBLY & USE
Open the carton carefully. DO NOT USE a box cutter or sharp implement as this may
damage the product. For OH&S, lay the carton on its side with the top of the carton
open and slide the plastic bag out containing the wheelchair.
1. Stand the wheelchair in
an upright position on the
ground
2. Push down on the
side seat rails of the
wheelchair until the seat
is flat to unfold the frame
To Next Page
Loading...
