30
Parking Monitor mode, in this mode status, dvr will auto on once detect any touch or
shake, then if will auto off if while no touch. So it will auto on & off continuously.
G-Sensor this function also will lock this status video file to avoid no overwrites then it can
keep as parking evidence. Please turn off this 2 function in MENU settings then try again.
At the same time, please turn off Motion Detect this function in MENU settings also,
because if Motion Detect is on, it will auto go to recording once have any movement in
front.
Q: Why my dvr always freeze while recording?
A: Please check if your memory card is original brand high speed Class 10 memory
card, if you use some copy card like Class 4 or Class 6, it will indicate SD card full or error
because it is not compatible will happen freeze while recording.
So if your camera happen freeze problem, please try to use another different new
original class 10 memory card to have a try, then you can identify the problem reason. If
change a new card still can not be ok, that maybe the dvr camera firmware problem,
please contact seller to upgrade firmware.
Q: Why my dvr camera recording image not clear?
A: Please check the video link that we upload online website link already, it is real
link, so its recording quality image exactly same as product. In dvr camera MENU settings
normally have 1296P, 720P, VGA option.
Highest quality image is 1296P, middle quality image is 720P, and lowest quality
image is VGA. Please set as highest resolution 1296P when you do recording.
If you set resolution as VGA, video image quality will be not clear, please change to
1296P option in settings.
Besides, video quality image sometimes will be not so good if the surroundings not so
good like at night or fog days.
Note: we reserve the modification right of the device design and specifications without
notice
To Previous Page
Loading...
