29
overwrited by cycle recording function.
Parking Monitor
When you park your car somewhere,turn on parking monitor function can make this
dvr camera do recording while parking time to avoid any offend to your car like steal or
scratch. At the same time,please do not forget set G-Sensor sensitive as high to work up
this function, also must buy external power cable to do power supply while parking.(Details
about power cable please see below)
Kindly remind:All car dvr inside battery very small can last working only around 2~3
minutes if no recharging,so Parking Monitor function can only be use d together with power
cable.
7. FAQ
Q: Why my dvr camera indicate “SD card Full”?
A: Please check if your memory card is original brand high speed Class 10 memory
card, if you use some copy card like Class 4 or Class 6, it will indicate “SD card full” because
it is not compatible. (Note please: DVR max support only 64GB card only)
Please check your dvr MENU settings if you have opened on Loop Recording this
function already? You must open ON Loop Recording this function the previous video can
be overwriting.
Please check your dvr MENU settings if you have turn OFF G-Sensor, Parking Monitor
& Motion Detect this 3 functions already at the same time? If G-Sensor is on, the file will be
protected to lock that can not be overwrite, also dvr will auto go to recording all the time if
Parking Monitor & Motion Detect is on, so the SD card will be full.
You must format to clear up your memory card file by hand at least 2~3 times within
a month because the memory card inside will have some locked file that happen while
driving at some emergency time, but this locked files can not be overwrite automatically.
You must delete them by hand.
Q: Why my dvr camera auto on & off continuously?
A: Please check first if your dvr MENU settings open on Parking Monitor and
G-Sensor this 2 function already? Normally if Parking Monitor is on the dvr will go to
To Next Page
Loading...
