2. Place the machine on the item to be cleaned (such as a bed), and slowly push
and pull the machine back and forth for cleaning. (Recommended cleaning speed
is less than 20 seconds per meter, back and forth three times).
3. The inside of the dust cup cover is equipped with an aromatherapy tablet
installation box. Users can choose the aromatherapy tablets of the same
specifications, which can keep the indoor environment with fresh fragrance
after use. After separating the dust cup upper cover assembly from the dust cup
assembly according to the cleaning and maintenance method, pull up the aroma
cover as shown in the figure, put the aroma piece (diameter 18.5, thickness
6.5) and press the aroma cover. Reinstall the upper cover assembly on the dust
cup and place it in the position of the main engine.
Note: This machine is equipped with 2-point protection and anti-tipping
function. The machine stops UV sterilization and ultrasonic mite removal
function when lifting too high. When using, please adjust the height between
the machine and the contact surface to ensure the normal operation of the
machine. If the UV lamp is raised too high and the ultrasonic function does not
work, it is a normal reaction.
Cleaning and maintenance
Clean the dust cup assembly and brush assembly regularly. Because the mites in
the adsorbed cotton may not be killed and will continue to reproduce, in order
to avoid secondary pollution, it is necessary to pour ash in time, clean the
dust cup assembly and the rolling brush assembly, and replace the new fine
filter cotton when the high efficiency filter cotton is seriously polluted.
Here's how:
1. Turn off the machine and remove the power plug
To Next Page
Loading...