ASROCK Rack D2163D8UM - H;W Monitor

D2163D8UM / D2143D8UM
48 49
English
3.3.9 H/W Monitor
In this section, it allows you to monitor the status of the hardware on your system, includ-
ing the parameters of the CPU temperature, motherboard temperature, CPU fan speed,
chassis fan speed, and the critical voltage.
Fan Control
If [Auto] is selected, the fan speed will controlled by BMC.
If [Manual] is selected, congure the items below.
CPU_FAN1
is allows you to set the CPU fan1’s speed. e default value is [Smart Fan].
SYSTEM_FAN1
is allows you to set the System fan1’s speed. e default value is [Smart Fan].
SYSTEM_FAN2
is allows you to set the System fan2’s speed. e default value is [Smart Fan].
SYSTEM_FAN3
is allows you to set the System fan3’s speed. e default value is [Smart Fan].
SYSTEM_FAN4
is allows you to set the System fan4’s speed. e default value is [Smart Fan].