ASROCK Rack D2163D8UM - Jumper Setup

D2163D8UM / D2143D8UM
16 17
English
2.5 Jumper Setup
e illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper
is “Open”. e illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”
when a jumper cap is placed on these 2 pins.
Chassis ID Jumpers
(3-pin CHASSIS_ID1)
(see p.6, No. 6)
(3-pin CHASSIS_ID2)
(see p.6, No. 4)
(3-pin CHASSIS_ID1)
(see p.6, No. 3)
Single Motherboard
Indication (Default)
System Level
ME Recovery Jumper
(3-pin ME_RECOVERY1)
(see p.6, No. 2)
Normal Mode (Default) ME Recovery Mode
CPU PECI Mode Jumper
(3-pin PECI1)
(see p.6, No. 44)
CPU PECI connect to PCH CPU PECI connect to BMC
(Default)
NVMDIMM Mode Jumpers
(3-pin AEP_1)
(see p.6, No. 12)
(3-pin AEP_ 2)
(see p.6, No. 18)
Normal Mode (Default) NVMDIMM Mode