Do you have a question about the ASROCK A75 Extreme6 and is the answer not in the manual?
Non-ECC | Yes |
---|---|
Memory channels | Dual-channel |
Memory slots type | DIMM |
Number of memory slots | 4 |
Supported memory types | DDR3-SDRAM |
Maximum internal memory | 32 GB |
Supported memory clock speeds | 800, 1066, 1333, 1600, 1866, 2400 MHz |
Processor socket | Socket FM1 |
Processor manufacturer | AMD |
Compatible processor series | AMD Sempron |
Processor thermal power (max) | 100 W |
USB 2.0 connectors | 3 |
Number of SATA III connectors | 8 |
Number of Parallel ATA connectors | 0 |
USB 3.2 Gen 1 (3.1 Gen 1) connectors | 1 |
USB 2.0 ports quantity | 2 |
Audio chip | Realtek ALC892 |
Cooling type | Passive |
Certification | FCC, CE, WHQL, ErP/EuP |
Component for | PC |
Motherboard chipset | AMD A75 FCH |
Audio output channels | 7.1 channels |
Motherboard form factor | ATX |
Compatible operating systems | Windows 7\\r Windows Vista\\r Windows XP |
RAID levels | 0, 1, 10 |
Supported storage drive interfaces | SATA III |
On-board graphics card | No |
Parallel processing technology support | 3-Way CrossFireX, Quad-GPU CrossFireX |
PCI Express slots version | 2.0 |
Cables included | SATA |
LAN controller | Realtek RTL8111E |
Networking features | Gigabit Ethernet |
Ethernet interface type | Fast Ethernet, Gigabit Ethernet |
BIOS type | AMI |
ACPI version | 1.1 |
BIOS memory size | 32 Mbit |
Depth | 244 mm |
---|---|
Width | 305 mm |
Lists all items included in the motherboard package.
Details technical specifications of the ASRock A75 Extreme6 motherboard.
Illustrates and identifies motherboard components and connectors.
Describes the rear input/output ports and their functions.
Safety guidelines and important precautions before installing hardware.
Step-by-step guide for installing the CPU and its heatsink.
Instructions for installing DDR3 DIMM memory modules correctly.
Guidance on installing PCI and PCI Express expansion cards.
Instructions for setting up AMD CrossFireX™ and Dual Graphics.
Guide to installing SATA HDDs and using Hot Plug/Swap functions.
Procedures for installing system drivers and operating systems.
How to navigate and use the UEFI setup utility interface.
Configuration options for overclocking CPU and DRAM settings.
Accessing and configuring advanced system parameters.
Settings for SATA controllers, modes (AHCI, RAID, IDE).
Configuring boot device priorities and related options.
Details on drivers and utilities available on the support CD.