3333
3333
33
3.3.23.3.2
3.3.23.3.2
3.3.2
Chipset ConfigurationChipset Configuration
Chipset ConfigurationChipset Configuration
Chipset Configuration
OnBoard LAN
This allows you to enable or disable the onboard LAN feature.
OnBoard HD Audio
Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio feature. If
you select [Auto], the onboard HD Audio will be disabled when PCI Sound
Card is plugged.
Front Panel Control
Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio Front Panel.
Share Memory
This allows you to set share memory feature. The default value is [Auto].
Configuration options: [Auto], [16MB], [32MB], [64MB], [128MB], and [256MB].
Primary Graphics Adapter
This item will switch the PCI Bus scanning order while searching for video
card. It allows you to select the type of Primary VGA in case of multiple
video controllers. The default value of this feature is [PCI]. Configuration
options: [PCI], [Onboard] and [PCI Express].
CPU - NB Link Speed
This feature allows you selecting CPU to NB link frequency. Configuration
options: [Auto], [200 MHz], [400 MHz], [600 MHz], [800 MHz], and [1000
MHz].
CPU - NB Link Width
This feature allows you selecting CPU to NB link width. Configuration options:
[Auto], [8 bit], and [16 bit].
BIOS SETUP UTILITY
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Chipset Settings
Onboard LAN
Onboard HD Audio
Front Panel Controller
Share Memory
Graphics Adapter
CPU-NB Link Speed
CPU-NB Kink Width
Primary
[Enabled]
[Auto]
[PCI]
[Auto]
[Auto]
[Auto]
[Auto]
Select Screen
Select Item
+ - Change Option
F1 General Help
F10 Save and Exit
ESC Exit
F9 Load Defaults
Advanced
DRAM Voltage
[Auto]
To set DRAM Voltage.
Memory Hole
Use this item to enable or disable memory hole. The Default value is
[Disabled].
DDRII Initialization Mode
Configuration options: [Auto] and [Compatible]. The default value is [Auto].
To Next Page
Loading...
Need help?
General
