ASROCK AMD X670 Series - Page 34

30
F0D1 SSD Mode
Allows you to select the BCLK Spread Spectrum Mode.
Conguration options: [Auto] [Disabled] [Down Spreading 0.10%] [Down Spreading
0.25%] [Down Spreading 0.50%] [Center Spreading 0.10%] [Center Spreading 0.25%]
[Center Spreading 0.50%]
Spectrum Spreading Share
When two SSC engines have the same modulation frequency, setting this bit to 1 will align
the phase of F0D1 SSC to F0D0 SSC.
Conguration options: [Auto] [Disabled] [Enabled]
CPU Overclocking
Allows you to congure CPU overclocking settings.
[Auto] Select this item to apply the default BCLK Delay setting.
[Customize] Select this item to customize BCLK Delay setting.
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) inserted
and assign the appropriate frequency automatically.
DRAM Prole
Loads XMP settings to overclock the DDR5 memory and perform beyond standard
specications.
DRAM Timing Conguration
Allows you to congure DRAM Timing.
CAS# Latency (tCL)
e time between sending a column address to the memory and the beginning of the data
in response.
RAS# to CAS# Delay to Read (tRCDRD)
e number of clock cycles required between the opening of a row of memory and
accessing columns within it.
Row Precharge Time (tRP)
e number of clock cycles required between the issuing of the precharge command and
opening the next row.