ASROCK AMD X670 Series User Manual

61
AMD X670/B650 Series
FEATURE FCLK DPM
Allows you to enable or disable FEATURE FCLK DPM.
Conguration options: [Auto] [Disabled] [Enabled]
SyncFifo Mode Override
Allows you to enable or disable SyncFifo Mode Override. When it is set to [Auto], SyncFifo
Mode is disabled.
Conguration options: [Auto] [Disabled] [Enabled]
Soc Miscellaneous Control
Press [Enter] to congure Soc Miscellaneous Control.
AGESA MPM Support
Allows you to enable or disable AGESA MPM Support. is only works on the platform
which is AIM-T capable.
Conguration options: [Auto] [Disabled] [Enabled].
ABL Console Out Control
[Enabled] Select this item to enable ConsoleOut Function for ABL.
[Disabled] Select this item to disable ConsoleOut Function for ABL.
Pluton (HSP) Options
Press [Enter] to congure Pluton (HSP) Options.
Pluton (HSP) X86 Firmware Support
Allows you to enable or disable X86 rmware HSP related code path, including AGESA
HSP module, and SBIOS HSP related driver.
[Auto] Depends on PcdAmdHspCoreEnable build value.
NOTE:
PSP directory entry 0xB BIT36 have the highest priority.
is option will NOT put HSP hardware in disabled state. To disable HSP hardware, you
need to set up PSP directiry entry OxB, BIT36 to 1.
// EntryValue[36] = 0: Enable, HSP core is enabled.
// EntryValue[36] = 1: Disable, HSP core is disabled and then PSP will gate the HSP clock;
no further PSP to HSP commands. System will boot without HSP.
Conguration options: [Auto] [Disabled] [Enabled].
Pluton (HSP) UART
HSP Firmware will print debug information to FCH UART. Select to enable or disable this
function. By default, it will be disabled.
Conguration options: [Auto] [Disabled] [Enabled].
Pluton (HSP) FIPS
Allows you to enable or disable FIPS mode for HSP.
Conguration options: [Auto] [Disabled] [Enabled].

ASROCK AMD X670 Series Specifications

General

Brand	ASROCK
Model	AMD X670 Series
Category	Motherboard
Language	English