ASROCK B560M - Page 25

English
21
B560M Steel Legend
Serial ATA3 Connectors
Right Angle:
(SATA3_2:
see p.1, No. 11) (Upper)
(SATA3_3:
see p.1, No. 11) (Lower)
(SATA3_4:
see p.1, No. 12) (Upper)
(SATA3_5:
see p.1, No. 12) (Lower)
Vertical:
(SATA3_0:
see p.1, No. 15)
(SATA3_1:
see p.1, No. 14)
ese six SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
* If M2_2 is occupied by
a SATA-type M.2 device,
SATA3_1 will be disabled.
USB 2.0 Headers
(9-pin USB3_4)
(see p.1, No. 19)
(9-pin USB5_6)
(see p.1, No. 18)
ere are two headers
on this motherboard.
Each USB 2.0 header can
support two ports.
USB 3.2 Gen1 Header
(19-pin USB3_5_6)
(see p.1, No. 9)
ere is one header on
this motherboard. is
USB 3.2 Gen1 header can
support two ports.
Front Panel Type C USB
3.2 Gen2x2 Header
(20-pin F_USB3_TC_1)
(see p.1, No. 10)
ere is one Front
Panel Type C USB 3.2
Gen2x2 Header on this
motherboard. is header
is used for connecting a
USB 3.2 Gen2x2 module
for additional USB 3.2
Gen2x2 ports.
DUMMY
GND
GND
P+
P-
USB_PWR
P+
P-
USB_PWR
1
1
IntA_ PB_D +
Dummy
IntA_ PB_D -
GND
IntA_ PB_S ST X +
GND
IntA_ PB_S ST X -
IntA_ PB_S SR X +
IntA_ PB_S SR X -
VbusVbus
Vbus
IntA_ PA_S SR X -
IntA_ PA_S SR X +
GND
IntA_ PA_S ST X -
IntA_ PA_S ST X +
GND
IntA_ PA_D -
IntA_ PA_D +
SATA3_4 SATA3_5
SATA3_1
SATA3_2 SATA3_3
SATA3_0
USB Type-C Cable