ASROCK B660-ITX - Page 48

42 43
English
B660-IT X
Initial RTL (MC1 C0 B1/B2)
Congure round trip latency initial value.
Initial RTL (MC1 C1 B1/B2)
Congure round trip latency initial value.
RTL (MC0 C0 A1/A2)
Congure round trip latency value.
RTL (MC0 C1 A1/A2)
Congure round trip latency value.
RTL (MC1 C0 B1/B2)
Congure round trip latency value.
RTL (MC1 C1 B1/B2)
Congure round trip latency value.
ODT Setting
Dimm ODT Training
ODT values will be optimized by Dimm On-Die Termination Training.
ODT WR (A1)
Congure the memory on die termination resistors' WR for channel A1.
ODT WR (A2)
Congure the memory on die termination resistors' WR for channel A2.
ODT WR (B1)
Congure the memory on die termination resistors' WR for channel B1.
ODT WR (B2)
Congure the memory on die termination resistors' WR for channel B2.
ODT NOM (A1)
Use this to change ODT (CH A1) Auto/Manual settings. e default is [Auto].
ODT NOM (A2)
Use this to change ODT (CH A2) Auto/Manual settings. e default is [Auto].