ASROCK H110 Pro BTC+ - Page 52

47
English
H110 Pro BTC+
Congure the Dll Bandwidth 2.
Dll Bandwidth 3
Congure the Dll Bandwidth 3.
Margin Limit
Adjust Margin Limit to get better memory margin.
Voltage Conguration
DRAM Voltage
Use this to congure DRAM Voltage. e default value is [Auto].
PCH Voltage
Congure the chipset voltage (1.0V).
VCCIO Voltage
Congure the voltage for the VCCIO.
Save User Default
Type a prole name and press enter to save your settings as user default.
Load User Default
Load previously saved user defaults.
Save User UEFI Setup Prole to Disk
Save current UEFI settings as an user default prole to disk.
Load User UEFI Setup Prole from Disk
Load previously saved user defaults from the disk.