ASROCK H610M/ac User Manual

Version 1.0
Published May 2022
Copyright©2022 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identication or explanation and to the owners’ benet, without intent to
infringe.
Disclaimer:
Specications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or tness for a particular
purpose.
In no event shall ASRock, its directors, ocers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of prots, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
is equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. ese limits are designed to provide
reasonable protection against harmful interference in a residential installation. is
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

ASROCK H610M/ac Specifications

General

Form Factor	Micro ATX
Socket	LGA 1700
Chipset	Intel H610
Memory Slots	2
Max Memory Support	64 GB
Memory Speed	DDR4 3200MHz
PCIe 4.0 x16	1
PCIe 4.0 x1	0
PCIe 3.0 x1	2
M.2 Slots	1
SATA Ports	4
USB 3.2 Gen1 Ports (Rear)	2
USB 3.2 Gen1 Ports	2
USB 2.0 Ports (Rear)	2
Bluetooth	Bluetooth 4.2
USB 2.0 Ports	2
Video Outputs	HDMI
Audio	Realtek ALC897
LAN	Realtek RTL8111H Gigabit LAN
Wi-Fi	802.11ac

Summary

Copyright and Disclaimer

Copyright Notice

Legal text regarding document reproduction and usage rights.

Disclaimer

Statement on specification changes, errors, and warranty limitations.

FCC Compliance Statement

Details device compliance with FCC Rules, including interference guidelines.

Intel End User Software License Agreement

License Terms and Conditions

Defines permitted use, restrictions, and conditions for Intel software license.

Software Ownership and Warranty

Covers copyright ownership, disclaims warranties, and limits liability for software.

Limitation of Liability

Specifies limits on Intel's liability for damages arising from software use.

License to Use Comments

Grants Intel rights for comments/suggestions provided by the licensee.

Termination and Governing Law

Outlines license termination, US government rights, export laws, and applicable jurisdiction.

Regional Compliance and Environmental Information

Regulatory Statements

Includes California, Australia, UKCA, and CE compliance and handling information.

Environmental Practices

Details ASRock's commitment to green design and environmental regulations.

Wireless Module Specifications

Frequency Band Restrictions

Specifies indoor usage restrictions for the 5.15-5.35GHz band.

Radio Transmit Power

Lists maximum output power for WiFi and Bluetooth transceivers.

Motherboard Layout and Components

Component Identification

Diagram and numbered list identifying key motherboard components and connectors.

I/O Panel Overview

I/O Ports Description

Details the function and connection for each I/O port on the rear panel.

LAN Port Indicators

Explains the status and speed indicators for the LAN RJ-45 port.

Audio Port Configuration

Describes the function of audio ports in 7.1-channel configuration.

WiFi and Bluetooth Module

Module Features and Standards

Describes the WiFi 802.11ac and Bluetooth 4.2 module's capabilities and standards.

WiFi Antennas Installation Guide

Chapter 1 Introduction

Package Contents

Lists all items included in the motherboard package.

Product Specifications

Platform, CPU, Chipset, Memory

Details motherboard platform, CPU support, chipset, and memory technology.

Expansion Slots and Graphics

Describes PCIe slots, M.2 socket, and integrated graphics capabilities.

Audio, Wireless LAN, and LAN

Specifies audio codec, wireless LAN standards, and Gigabit LAN features.

Rear Panel I/O and Storage

Lists rear panel I/O ports and internal storage connectors (SATA, M.2).

Internal Connectors and Headers

Details various onboard headers for front panel, fans, power, and TPM.

BIOS and Hardware Monitor

Describes BIOS features and hardware monitoring capabilities.

Operating System and Certifications

Lists supported OS and relevant certifications like FCC, CE, ErP/EuP.

Overclocking Warning

Warns about risks associated with overclocking system components.

Chapter 2 Installation

Pre-installation Precautions

Provides essential safety and handling precautions before installing components.

Installing the CPU

Step-by-step guide for safely installing the CPU into the motherboard socket.

Installing CPU Fan and Heatsink

Instructions for mounting the CPU cooler and fan assembly.

Installing Memory Modules (DIMM)

Guide for correctly installing DDR4 memory modules into the DIMM slots.

Expansion Slots (PCI Express)

Details the types and usage of available PCI Express slots on the motherboard.

Jumpers Setup

Explains how to configure jumpers, specifically the Clear CMOS jumper.

Onboard Headers and Connectors

Describes various onboard headers for system panel, chassis intrusion, USB, audio, and fan connections.

M.2_SSD (NGFF) Module Installation

Installation Steps

Provides a step-by-step guide for installing an M.2 SSD module.

M.2_SSD Module Support List

Contact Information