29
2.10 Serial ATA (SATA) / Serial ATA2 (SATA2) Hard Disks
Installation
This motherboard adopts Intel
®
H61 chipset that supports Serial ATA (SATA) / Serial
ATA2 (SATA2) hard disks. You may install SATA / SATA2 hard disks on this mother-
board for internal storage devices. This section will guide you to install the SATA /
SATA2 hard disks.
STEP 1: Install the SATA / SATA2 hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA / SATA2 hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard’s SATA2 con-
nector.
STEP 4: Connect the other end of the SATA data cable to the SATA / SATA2 hard
disk.
2.11 Hot Plug Function for SATA / SATA2 HDDs
This motherboard supports Hot Plug function for SATA / SATA2 in AHCI mode.
Intel
®
H61 chipset provides hardware support for Advanced Host controller Interface
(AHCI), a new programming interface for SATA host controllers developed thru a
joint industry effort.
NOTE
What is Hot Plug Function?
If the SATA / SATA2 HDDs are NOT set for RAID conguration, it is called “Hot
Plug” for the action to insert and remove the SATA / SATA2 HDDs while the
system is still power-on and in working condition.
However, please note that it cannot perform Hot Plug if the OS has been
installed into the SATA / SATA2 HDD.
To Next Page
Loading...
