EasyManuals Logo

ASROCK K7S41GX2 User Manual

ASROCK K7S41GX2
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
88
88
8
CAUTION!
1. Do NOT use a 3.3V AGP card on the AGP slot of this motherboard!
It may cause permanent damage!
2. The maximum shared memory size is defined by the chipset vendor and
is subject to change. Please check SiS
®
website for the latest information.
3. Power Management for USB 2.0 works fine under Microsoft
®
Windows
®
XP SP1 or SP2 / 2000 SP4.
4. Featuring an advanced proprietary hardware and software design,
Intelligent Energy Saver is a revolutionary technology that delivers
unparalleled power savings.
5. ASRock Instant Flash is a BIOS flash utility embedded in Flash ROM.
This convenient BIOS update tool allows you to update system BIOS
without entering operating systems first like MS-DOS or Windows
®
. With
this utility, you can press <F6> key during the POST or press <F2> key to
BIOS setup menu to access ASRock Instant Flash. Just launch this tool
and save the new BIOS file to your USB flash drive, floppy disk or hard
drive, then you can update your BIOS only in a few clicks without prepar-
ing an additional floppy diskette or other complicated flash utility. Please
be noted that the USB flash drive or hard drive must use FAT32/16/12 file
system.
6. Although this motherboard offers stepless control, it is not recommended
to perform over clocking. Frequencies other than the recommended CPU
bus frequencies may cause the instability of the system or damage the
CPU. The CPU host frequency of this motherboard is determined by the
jumper-setting. You must set the FSB jumper according to your AMD CPU
before you use the “Manual” option as the FSB setting in BIOS setup to
perform over clocking. Please check page 24 for details.
7. While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the
motherboard functions properly and unplug the power cord, then plug it
back again. To improve heat dissipation, remember to spray thermal
grease between the CPU and the heatsink when you install the PC system.

Other manuals for ASROCK K7S41GX2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ASROCK K7S41GX2 and is the answer not in the manual?

ASROCK K7S41GX2 Specifications

General IconGeneral
BrandASROCK
ModelK7S41GX2
CategoryMotherboard
LanguageEnglish

Related product manuals