ASROCK PG27Q15R2A - User Manual

Questions and Answers

J
Jennifer EspinozaAug 12, 2025
What to do if the ASROCK PG27Q15R2A Monitor power LED is on but there's no picture?
- H
  Hector ShafferAug 12, 2025
  If the power LED on your ASROCK Monitor is ON (Orange) but there's no video or picture, ensure that the computer power switch is in the ON position. Also, check that the computer video card is properly seated in its slot. Verify the monitor's video cable is correctly connected to the computer and inspect the cable for any bent pins. Finally, confirm that the computer is operational by pressing the CAPS LOCK key and observing if the CAPS LOCK LED turns ON or OFF.
W
williamsgeorgeAug 16, 2025
How to fix an ASROCK PG27Q15R2A Monitor with no signal?
- S
  sharon21Aug 16, 2025
  If your ASROCK Monitor displays no signal, first ensure that the signal cable is properly connected. If the connector feels loose, tighten its screws. Also, inspect the signal cable's connection pins for any damage.
J
jonathon25Aug 19, 2025
What to do if I can't open the OSD menu on my ASROCK PG27Q15R2A?
- R
  Randall GreenAug 20, 2025
  If you are unable to open the OSD menu on your ASROCK Monitor, try turning off the monitor, unplugging the power cord, plugging it back in, and then powering on the monitor. Also, check if the OSD menu is locked by pressing and holding the Navi Key for 5~6 seconds to unlock it.
P
Peter StewartAug 23, 2025
Why does my ASROCK PG27Q15R2A Monitor picture bounce or have waves?
- O
  omillerAug 25, 2025
  If the picture on your ASROCK Monitor bounces or shows a wave pattern, try moving any electrical devices that might be causing electrical interference.
W
William PerkinsAug 27, 2025
How to fix color defects on ASROCK PG27Q15R2A?
- M
  Mary TravisAug 27, 2025
  If you notice color defects on your ASROCK Monitor, where white does not appear white, try adjusting the RGB color settings or selecting a different color temperature in the monitor's settings.
K
Kevin RodriguezAug 31, 2025
How to fix a fuzzy picture on ASROCK Monitor?
- D
  dennis63Aug 31, 2025
  To resolve a fuzzy picture on your ASROCK Monitor, adjust the Contrast and Brightness Controls.
K
Katherine FullerSep 3, 2025
Why is the power LED not on on my ASROCK PG27Q15R2A?
- C
  cheryl40Sep 3, 2025
  If the power LED is not on for your ASROCK Monitor, check if the Power Switch is in the ON position and ensure the Power Cord is properly connected.
R
Ronald MartinezSep 8, 2025
What to do if one primary color is missing on ASROCK PG27Q15R2A Monitor?
- T
  Terry HarrisSep 8, 2025
  If one of the primary colors (RED, GREEN, or BLUE) is missing on your ASROCK Monitor, inspect the monitor’s video cable and make sure that none of the pins are bent.

Summary

Chapter 2 Specifications

Detailed Monitor Specifications

Details technical specifications of the ASRock PG27Q15R2A monitor, including size, resolution, and refresh rate.

Preset Display Modes

Chapter 5 Connecting the Monitor

Chapter 7 OSD Setup

Luminance OSD Settings

Details OSD settings for Contrast, Brightness, Preset Modes, DCR, and MPRT.

Image Setup OSD

Covers OSD settings for Image Ratio, OD, FreeSync Premium, and HDR.

Color Temperature and Blue Light

Explains OSD settings for color temperature presets and blue light reduction.

OSD Display Settings

Extra OSD Menu

Chapter 8 Troubleshooting

Chapter 9 Safety Instructions

Power Safety Guidelines

ASROCK PG27Q15R2A Specifications

General

Panel type	VA
Color gamut	87 %
Pixel pitch	0.2331 x 0.2331 mm
Display diagonal	27 \
Anti-glare screen	Yes
Display technology	-
Native aspect ratio	16:9
Screen curvature rating	1500R
Viewable size, vertical	335.664 mm
sRGB coverage (typical)	110 %
Contrast ratio (typical)	4000:1
Display number of colors	16.7 million colors
Viewable size, horizontal	596.736 mm
Digital vertical frequency	48 - 165 Hz
Digital horizontal frequency	30 - 250 kHz
Display brightness (typical)	550 cd/m²
High Dynamic Range (HDR) technology	DisplayHDR 400
AMD FreeSync type	FreeSync Premium
Headphone outputs	1
DisplayPort version	1.4
Headphone connectivity	3.5 mm
RMS rated power	4 W
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax), Wi-Fi 6E (802.11ax)
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	80 W
Power consumption (off)	0.3 W
Power consumption (standby)	- W
Power consumption (typical)	45 W
Power consumption (PowerSave)	0.5 W
Tilt angle range	20 - -7 °
Height adjustment	100 mm
Panel mounting interface	100 x 100 mm
Product color	Black
Market positioning	Gaming
Package type	Box
Package weight	8900 g

Weight and Dimensions

Depth (with stand)	257.41 mm
Width (with stand)	610.34 mm
Height (with stand)	568.05 mm
Weight (with stand)	6850 g
Depth (without stand)	93.22 mm
Height (without stand)	367.34 mm
Weight (without stand)	4650 g