ASROCK PG32QF2B User Manual (English)

Questions and Answers:

T
Tyler SotoAug 14, 2025
What to do if the ASROCK Monitor power LED is ON (Orange) but there's no video?
- D
  Derek MoodyAug 14, 2025
  If the power LED is orange but there's no picture on your ASROCK Monitor, ensure the computer power switch is ON. Also, check that the computer video card is properly seated in its slot. Verify the monitor's video cable is correctly connected to the computer and inspect the cable for bent pins. Finally, confirm the computer is operational by pressing the CAPS LOCK key and observing the CAPS LOCK LED.
J
james96Aug 17, 2025
How to fix no signal on ASROCK Monitor?
- K
  Kelly GillespieAug 17, 2025
  If your ASROCK Monitor displays 'No Signal', first check that the signal cable is properly connected. If the connector feels loose, tighten the screws. Also, inspect the signal cable's connection pins for any damage.
K
Kim RodriguezAug 21, 2025
How to fix ASROCK Monitor if power LED is not on?
- C
  Carol WhiteAug 21, 2025
  If the power LED on your ASROCK Monitor is not lit, verify that the power switch is in the ON position and that the power cord is securely connected.
M
Melissa GallagherAug 25, 2025
What to do if unable to open OSD menu on ASROCK Monitor?
- U
  urobinsonAug 26, 2025
  If you're unable to open the OSD menu on your ASROCK monitor, try turning off the monitor, unplugging the power cord, plugging it back in, and then powering on the monitor again. Also, check if the OSD menu is locked. If it is, press and hold the Navi Key for 5~6 seconds to unlock it.
M
Melissa EvansAug 28, 2025
Why does my ASROCK PG32QF2B picture bounce or have a wave pattern?
- L
  Lauren KaneAug 28, 2025
  If your ASROCK Monitor's picture bounces or shows a wave pattern, move any nearby electrical devices that could be causing electrical interference.
V
villanuevastevenSep 2, 2025
How to fix a fuzzy picture on ASROCK PG32QF2B Monitor?
- S
  Scott HaleySep 2, 2025
  If the picture on your ASROCK Monitor appears fuzzy, try adjusting the Contrast and Brightness controls.
J
Jeffery ShawSep 5, 2025
How to correct color defects on ASROCK PG32QF2B Monitor (white not looking white)?
- M
  Maria YoungSep 5, 2025
  If your ASROCK Monitor's picture has color defects, such as white not appearing white, try adjusting the RGB color settings or selecting a different color temperature.
D
David TapiaSep 8, 2025
What causes missing primary colors on ASROCK PG32QF2B?
- C
  chughesSep 9, 2025
  If one of the primary colors (RED, GREEN, or BLUE) is missing on your ASROCK Monitor, inspect the monitor’s video cable and make sure that none of the pins are bent.

ASROCK PG32QF2B Specifications

General

Panel type	VA
Color gamut	92 %
Pixel pitch	0.2724 x 0.2724 mm
Screen shape	Flat
Display diagonal	31.5 \
Anti-glare screen	Yes
Display technology	-
Native aspect ratio	16:9
Viewable size, vertical	392.256 mm
sRGB coverage (typical)	116 %
Contrast ratio (typical)	3000:1
Display number of colors	16.7 million colors
Viewable size, horizontal	697.344 mm
Digital vertical frequency	48 - 165 Hz
Digital horizontal frequency	30 - 250 kHz
Display brightness (typical)	550 cd/m²
High Dynamic Range (HDR) technology	DisplayHDR 400
AMD FreeSync type	FreeSync Premium
RMS rated power	4 W
Number of speakers	2
Product color	Black
Market positioning	Gaming
DisplayPort version	1.4
Headphone connectivity	3.5 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	90 W
Power consumption (off)	0.3 W
Power consumption (standby)	- W
Power consumption (typical)	45 W
Power consumption (PowerSave)	0.5 W
Tilt angle range	20 - -7 °
Panel mounting interface	100 x 100 mm
Package type	Box
Package weight	11340 g
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax), Wi-Fi 6E (802.11ax)

Weight and Dimensions

Depth (with stand)	283.1 mm
Width (with stand)	713.89 mm
Height (with stand)	598.01 mm
Weight (with stand)	8820 g
Depth (without stand)	70.55 mm
Height (without stand)	423.19 mm
Weight (without stand)	6500 g