ASROCK X300-ITX User Manual

English
38
Global C-state Control
is option controls IO based C-state generation and DF C-states.
Graphic Conguration
GFX Clock Frequency
(Only for processor with integrated graphics)
is item allows you to alter the frequency for the GFX clock frequency. Aer you
alter the GFX Clock Frequency settings, make sure to adjust the GFX Core Voltage
settings.
*e adjustable range is dependent on the CPU being installed.
GFX Core Voltage
(Only for processor with integrated graphics)
is item allows you to alter the voltage for the GFX Core Voltage.
*e adjustable range is dependent on the CPU being installed.
DRAM Timing Conguration
DRAM Information
Load XMP Setting
Load XMP settings to overclock the memory and perform beyond standard
specications.
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) inserted
and assign the appropriate frequency automatically. Setting DRAM Frequency can
adjust DRAM Timing.
Innity Fabric Frequency and Dividers
AMD Overclocking Setup Set Innity Fabric frequency (FCLK). Auto: FCLK =
MCLK. Manual: FCLK must be less than or equal to MCLK for best performance in
most cases. Latency penalties are incurred if FCLK and MCLK are mismatched, but
suciently high MCLK can negate or overcome this penalty.
DRAM Timing Conguration
Voltage Conguration
CPU Vcore Voltage (Oset)
Congure the voltage for the CPU Vcore (Oset).
VDDCR SOC Voltage (Oset)
Congure the voltage for the VDDCR SOC (Oset)

ASROCK X300-ITX Specifications

General

Brand	ASROCK
Model	X300-ITX
Category	Motherboard
Language	English