To Next Page

To Previous Page

English

X99 WS

2.9 SLI

, 3-Way SLI

, 4-Way SLI

and Quad SLI

Operation

Guide

is motherboard supports NVIDIA® SLI

, 3-way SLI

, 4-way SLI

and Quad

SLI

(Scalable Link Interface) technology that allows you to install up to four

identical PCI Express x16 graphics cards. Currently, NVIDIA® SLI

and Quad

SLI

technology supports Windows® 7 / 7 64-bit / 8 / 8 64-bit / 8.1 / 8.1 64-bit OS.

2.9.1 Installing Two SLI

-Ready Graphics Cards

Step 1

Insert one graphics card into PCIE1 slot

and the other graphics card to PCIE4 slot.

Make sure that the cards are properly

seated on the slots.

Step 2

If required, connect the auxiliary power

source to the PCI Express graphics cards.

Requirements

1. You should only use identical SLI

-ready graphics cards that are NVIDIA® certi-

ed.

2. Make sure that your graphics card driver supports NVIDIA® SLI

technology.

Download the drivers from the NVIDIA® website: www.nvidia.com

3. Make sure that your power supply unit (PSU) can provide at least the minimum

power your system requires. It is recommended to use a NVIDIA® certied PSU.

Please refer to the NVIDIA® website for details.

ASROCK X99 WS User Manual

Questions and Answers: