ASROCK X99E-ITX/ac User Manual

53
English
X99E-ITX/ac
CPU Tj Max
Set CPU Tj Max to adjust TCC Target Temperature. Default setting is 105°C.
DRAM Conguration
DRAM Tweaker
Fine tune the DRAM settings by leaving marks in checkboxes. Click OK to conrm and
apply your new settings.
DRAM Timing Conguration
Power Saving Mode
Enable Power Saving Mode to reduce power consumption.
BCLK Frequency
e CPU speed is determined by the CPU Ratio multiplied with the BCLK. Increasing the
BCLK will increase the internal CPU clock speed but also aect the clock speed of other
components.
DRAM Voltage
Use this to congure DRAM Voltage. e default value is [Auto].
DRAM Reference Clock
Select Auto for optimized settings.
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) inserted
and assign the appropriate frequency automatically.
DRAM Frequency OC Preset
If the DRAM frequency is selected, the corresponding DRAM and BCLK frequency
for overclocking will be set.
Primary Timing
CAS# Latency (tCL)
e time between sending a column address to the memory and the beginning of the data
in response.
RAS# to CAS# Delay (tRCD)
e number of clock cycles required between the opening of a row of memory and
accessing columns within it.

ASROCK X99E-ITX/ac Specifications

General

Brand	ASROCK
Model	X99E-ITX/ac
Category	Motherboard
Language	English