ASROCK Z690M PG Riptide/D5 - Page 30

22
English
CPU Fan Connector
(4-pin CPU_FAN1)
(see p.6, No. 3)
is motherboard pro-
vides a 4-Pin CPU fan
(Quiet Fan) connector.
If you plan to connect a
3-Pin CPU fan, please
connect it to Pin 1-3.
CPU/Water Pump Fan
Connector
(4-pin CPU_FAN2/WP)
(see p.6, No. 7)
is motherboard pro-
vides a 4-Pin water cooling
CPU fan connector. If you
plan to connect a 3-Pin
CPU water cooler fan,
please connect it to Pin
1-3.
ATX Power Connector
(24-pin ATX PWR1)
(see p.6, No. 11)
is motherboard pro-
vides a 24-pin ATX power
connector. To use a 20-pin
ATX power supply, please
plug it along Pin 1 and Pin
13.
ATX 12V Power
Connector
(8-pin ATX12V1)
(see p.6, No. 1)
is motherboard
provides a 8-pin ATX 12V
power connector. To use a
4-pin ATX power supply,
please plug it along Pin 1
and Pin 5.
*Warning: Please make
sure that the power cable
connected is for the CPU
and not the graphics
card. Do not plug the
PCIe power cable to this
connector.
+12V
GND
CPU_FAN_SPEED
FAN_SPEED_CONTROL
1 2 3 4
CPU_F
FAN_VOLTAGE
GND
AN_SPEED
FAN_SPEED_CONTROL
4 3 2 1
12
1
24
13
4
1
8 5
30 / 113