ASROCK Z690M PG Riptide/D5 - Driver Installation and Setup

29
English
Z690M PG Riptide/D5
Step 1
Power on your computer and boot into OS.
Step 2
Remove the AMD drivers if you have any VGA drivers installed in your system.
Step 3
Install the required drivers and CATALYST Control Center then restart your
computer. Please check AMD’s website for details.
2.9.2 Driver Installation and Setup
Step 4
Double-click the AMD Catalyst Control
Center icon in the Windows
®
system tray.
Step 5
In the le pane, click Performance and
then AMD CrossFire
TM
. en select
Enable AMD CrossFire and click Apply.
Select the GPU number according to your
graphics card and click Apply.
AMD Catalyst Control Center
e Catalyst Uninstaller is an optional download. We recommend using this utility
to uninstall any previously installed Catalyst drivers prior to installation. Please
check AMD’s website for AMD driver updates.
37 / 113