Need help?Do you have a question about the Assa Abloy HKC SW-10270 and is the answer not in the manual?
General| Brand | Assa Abloy |
|---|---|
| Model | HKC SW-10270 |
| Category | Security System |
| Language | English |
Arm the system with an exit timer.
Quickly arm the system without an exit timer.
Arm only zones assigned to system A.
Arm only zones assigned to system B.
View the most recent events logged by the system.
Activate the walk test to check zones.
Activate or deactivate a zone with the Chime Feature.
Activate sirens/bells for testing.
Enter a special menu with added features.
Unset the system.
Enter the Manager Menu if permitted.
Change the system's date and time.
View logged system events like alarms and faults.
Add or change user codes and follow prompts.
Change user code features like unsetting or inhibiting.
Assign meaningful names to user codes.
Assign user codes to system blocks or areas.
Activate proximity fobs/tags for users.
Configure system settings.
Change SMS phone numbers and send test SMS.
Configure Wi-Fi settings, see page 10.
Arm the system with an exit timer using code.
Arm the system without an exit timer using code.
Unset the system or cancel an active alarm.
Use a tag to set and unset the system automatically.
Inhibit specific zones for Part Set A.
Inhibit specific zones for Part Set B.
Inhibit single zones to keep them inactive during system set.
Inhibit multiple zones simultaneously during system set.
Arm system with zones automatically inhibited.
Unset the system as part of a remote reset procedure.
Steps for performing a remote system reset via Alarm Receiving Centre.
Access the Manager Menu via Wi-Fi settings.
Set system date and time via Wi-Fi interface.
Manage Wi-Fi network settings and access points.
Scan and select available Wi-Fi access points.
Display the current Wi-Fi password.
Delete the existing Wi-Fi password.
Enter and confirm a new Wi-Fi password.
Guide to typing passwords using the keypad characters.
Understand the meaning of keyfob indicator light colours.
Activate duress by pressing and holding the button.
Use the button to unset the system.
Press button once to activate Part Set A.
Press button once to perform a Full Set.
Press button once to activate Part Set B.
Press to toggle lights on or off.
Press to Full-set without an exit timer.
To Next Page
