Assa Abloy Yale SR-BX-ZW User Manual

External Siren
(SR-BX-ZW)
smart
Living
For more information on this product
and Yale Smart Living Range visit
www.yale.co.uk/smart-living
Consumer Support: info@yale.co.uk
2
The 2 year guarantee for this
product is active from the date
of purchase (A copy of this
guarantee is available on our
website).
Description
SR-BX-ZW is a Z-Wave External Siren that can
connect to compatible Z-Wave enabled networks.
It is capable of sounding an alarm upon receiving
an alarm signal from the controller in the Z-Wave
network when an alarm is activated. When
triggered, the Siren will sound and the LED
strobe will flash to attract attention.
Power Supply
The Siren is powered by 4x D-cell Alkaline batteries.
On the right hand side of the PC board it has a
power switch to turn the batteries ON or OFF.
The Siren can also be powered using an optional 9V
1A power adaptor (via 9V power input). When wired,
the Siren will primarily draw power from the 9V
power adaptor and the batteries will act as a backup
power source in the event of a power cut. The battery
ON/OFF switch does not effect the 9V power adaptor.
Under battery only operation (without 9V power
supply), the Siren will report the battery level (100%,
75%, 50%, 25%, 10%, 0%) and low battery condition
(when power drops below 10%). This indicates that
the Siren has less than 1 month of standby power
before the batteries are exhausted. The Siren will also
beep five times when arming/disarming to indicate low
battery condition.
Note: When changing batteries, press the learn button
a few times to fully discharge before inserting new
batteries.
Front
Screw
Front View Back View Inside View
Mounting
Screw
Mounting
Screw
Mounting
Screw
Mounting
Screw
Mounting
Screw
Wall
Tamper
Learn
Button
Front
Cover
Tamper
9V Power
Input
(-) (+)
LED 1
LED 2
LED 3
Battery
Power
Switch
Battery
Compartment
1

Assa Abloy Yale SR-BX-ZW Specifications

General

Brand	Assa Abloy
Model	Yale SR-BX-ZW
Category	Security System
Language	English

Summary

Product Description and Power

Product Description

Overview of the Z-Wave External Siren's capabilities and alarm signaling.

Power Supply Options

Explains how the siren is powered by batteries or an optional 9V adapter.

Z-Wave Network Integration

Adding and Removing Siren

Steps for adding the siren to a Z-Wave network and removing it.

Factory Reset Procedure

Instructions for performing a factory reset when the controller is missing.

Siren Installation

Guidance on mounting the siren securely and activating tamper protection.

Siren Function Overview

Details on siren sound, power adaptor failure, and tamper alarm.

Siren Operation and Status

Tamper Alarm

Explains how the siren detects cover removal or detachment from the wall.

Confirmation Beeps

How the siren provides audible feedback for arming and disarming.

Entry Sound Settings

Options to enable or disable entry delay warning beeps.

Alarm Activation and Length

How the siren sounds and flashes for different alarm types and duration.

Audio and Visual Status Indication

Table detailing siren audio and strobe light patterns for system status.

Z-Wave Technical Configuration

Z-Wave Configuration Parameters

Details on configurable parameters like alarm length and tamper settings.

Z-Wave Information

Information on the siren's Z-Wave Plus compatibility and device role.

Z-Wave Groups and Associations

Explanation of association groups for reporting events to other Z-Wave devices.