Norton is a brand associated with ASSA ABLOY Accessories and Door Controls Group, Inc., an ASSA ABLOY Group company.
Copyright © 2020, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9370-0002-020 Rev 2 07/20
Norton Technical Product Support:
Monroe, NC 28112 USA
Phone: 800.438.1951 ext: 6030
TechSupport.Norton@assaabloy.com
nortondoorcontrols.com
Two Modes:
Standby (default LED Red)
Operating (default LED ashing Green)
To operate switch, make a slow waving
motion with hand in front of plate within
4" (101mm).
When hand movement is detected or
backup button is pressed, a tone will
sound and LED circle will ash to indicate
relay has been activated. (Fig 6)
Relay will activate for amount of time as
set by time delay jumpers. Backup button
can be used to activate relay at any time.
(Fig 6)
LED
Backup
Button
Operation
Figure 6
Approved 2020-07-09
To Previous Page
Loading...
Need help?
General
