9-1
SORGENTE/SMILE/ISI-T/UNDERCOUNTER - Installation, Use and Maintenance - cod. A-MAN03 - Rev. 02/2012
9. Dismantling
CAUTION
Instructions related to this
chapter are to be intended
just as an indication.
Refer to the regulations in force
in the Country where the device
is used.
9.1 Dispenser dismantling
The dispenser must be dismantled after disassembling the
different parts that make it up.
Request the Retailer for speciļ¬c information regarding the
dismantling operations.
Once disassembled the different parts, subdivide the different
components separating metal from plastic, copper, etc. ac-
cording with the type of separate waste disposal in force in
the Country where the dispenser is dismantled.
In case it is necessary to store the different components
waiting to be accepted in the dump, pay attention to preserve
them in a safe place sheltered against atmospheric agents, in
order to prevent contamination of ground and water.
9.2 Electronic components disposal
The community directive 2002/96/EC, adopted in Italy with
legislative decree n. 151 of the 25th of July 2005, impo-
ses to manufacturers and users of electric and electronic
equipment a series of obligations related to the collection,
treatment, reuse and disposal of this kind of waste.
Pay attention to the waste disposal regulations in force.
Keep in mind that unauthorized disposal of this kind of
waste involves application of financial penalties provided
by regulations in force.
To Next Page
