Associated Electrics RC10 B74.2D TEAM KIT - Page 19

19
:: :: Bag 12 -Bag 12 - Step 4 Step 4
:: :: Bag 12 -Bag 12 - Step 5 Step 5
:: :: Bag 13 -Bag 13 - Step 1 Step 1
0mm/flush
Rear view, the linkage pivot
should sit directly above
the pivot on the arm.
!
Make sure the fl ange on
the shock pivot ball is
towards the arm.
!
Rear view, the linkage pivot
should sit directly above
the pivot on the arm.
!
x2x2
31500
M3x2.5mm
set screw
x2x2
x2x2
x2x2
89219
M3x5mm
set screw
31511
M2x5mm
SHCS
92309
Gearbox
anti-roll bar
cap
Do not overtighten the set screws.
Anti-roll bar should pivot freely.
!
Install bleeder screws facing
towards car center to keep them
clean from dirt
!
Install x2 front and x2 rear shocks
25612
M3 flanged
nut, black
89203
M3x16mm
BHCS
25612
M3 flanged
nut, black