Associated Electrics RC8B4.1e Team Kit - Front Gearbox Assembly - Steps 6-8; Anti-Roll Bar Securing and Body Posts; Shock Tower and Arm Mounts

13
:: :: Front Gearbox Front Gearbox BuildBuild - Bag - Bag 5.1, 5.2, 5.35.1, 5.2, 5.3 -- Step 7Step 7
:: :: Front Gearbox Front Gearbox BuildBuild - Bag - Bag 5.1, 5.2, 5.35.1, 5.2, 5.3 -- Step 8Step 8
:: :: Front Gearbox Front Gearbox BuildBuild - Bag - Bag 5.1, 5.2, 5.35.1, 5.2, 5.3 -- Step 6Step 6
#1596
thread lock
31541
3x6mm
FHCS
89214
4X12mm
FHCS
89214
4x12mm
FHCS
89216
M4
Locknut
x2x2
x2x2
81524
Body Post,
Front
31532
3x8mm
BHCS
81525
Chassis
Brace,
Front
81576
RC8B4e
Top Plate
81520
Arm Mount
Insert,
Center
x2x2
Kit Setup:
31521
2.5x8mm
BHCS
25225
3x3mm
Set Screw
x2x2
x2x2
81257
3x6mm
Set Screw
x2x2
Tighten 3x6mm set screws
just enough to still allow the
anti-roll bar to move freely.
!
81647
B4.1 Upper
Link Mount,
Angled
Install arm
mount inserts in
direction shown!
!
#1596
thread lock
81632
B4.1 Front
Shock Tower,
26.5mm
81520
Arm Mount
Insert,
Side
x2
Kit Setup:
89226
M3x26mm
SHCS
81508
Shock
Bushing,
Front
x2x2
x2x2
mount inserts in
direction shown!
x2
1
2
3