Associated Electrics RC8B4.1e Team Kit - Center Bulkhead & Radio Tray - Steps 3-1; Motor Mount and Fan Installation; Radio Tray and Servo Installation

21
:: :: Radio TrayRadio Tray Build Build - - Bag 10.1, 11.1 - Step 1
:: C:: Center Bulkheadenter Bulkhead - - Bag 9.1 Bag 9.1 - Step 3- Step 3
81582
RC8B4e
Motor Mount,
Lower
81582
RC8B4e
Motor Mount,
Upper
89454
3x12mm
SHCS
81262
4x10mm
FHCS
81114
Engine Mount
Washer
x2x2
x2x2
x2x2
Optional!
30mm fan
(not included)
(not included)
(not included)
Fan, motor, and pinion
not included.
If installing a fan, attach
before installing motor
mounts.
Hardware not included.
Maximum screw depth 4mm.
Install servo mount wire clip
1st, then the receiver box to
the chassis
Wire clip fits
under this foot!
Install servo
splines toward
front of buggy!
!
!
!
!
41094
3x14mm
LP SHCS
31518
2.5x4mm
FHCS
89214
4x12mm
FHCS
4675
2.5x6mm
FHCS
81572
RC8B4e
Servo Mount
Wire Clip
81572
RC8B4e
Receiver Box
Wire Clip
81572
RC8B4e
Receiver
Box, Lower
x4x4
x2x2
2
2
1
1
#1596
thread lock
#1596
thread lock