EasyManua.ls Logo

Astell AMB220 User Manual

Astell AMB220
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MANUAL NUMBER: IM_20_80_01J
INSTRUCTION MANUAL
AMB220
|
AMB230
|
AMB240 | AMB420 | AMB430 | AMB440
AMA240 | AMA440
AUTOCLAVES & STERILIZERS

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Astell AMB220 and is the answer not in the manual?

Astell AMB220 Specifications

General IconGeneral
CategoryLaboratory Equipment
Capacity220 g
InterfaceRS232
Pan Size90mm
Unitsg, %
Operating Humidity80 %RH

Summary

Safety and Graphical Symbols

Safety Instructions and General Information

Electrical and Thermal Fire Risk

Risks associated with electrical circuitry and heat.

Handling, Moving, and Load Safety

Guidelines for safe lifting, moving, and handling loads.

Legal and Safety Regulations

Risk Assessment – Health and Safety

Equipment Safety Assessment

Covers intended use, technical specs, assistance, risk mitigation, and parts.

Safety Valve Testing Procedures

Testing Procedures and Warnings

Explains safety valve testing, its frequency, and warnings.

Step-by-Step Test Execution

Concise guide for performing the safety valve test.

Operating Instructions and Security

Approved Use and Prohibited Substances

Specifies approved uses and prohibited substances.

Security Password Management

Details on default passwords and system security.

Benchtop Steriliser Quick Reference

Core Operation Steps

A step-by-step guide for basic steriliser operation from power on to unloading.

System Controls and Alarms

System Readouts and Fault Reporting

Covers chamber readouts, pressure gauges, timing, and alarm system.

Initial Power Up and Interface Elements

Door Controls and Operation

Opening and Closing the Door

Procedure to open and secure the steriliser door.

Handle Locked with Door Open

How to restore normal operation if handle is locked.

Program Selection and Important Notes

Starting a Cycle and Delayed Start Options

Starting a Sterilisation Cycle

Steps to start a sterilisation cycle.

Cycle Start and Power Failure Actions

Starting Cycle Without Delay

Procedure for starting a cycle without delay.

Action After Power Failure

System behavior and recovery after power interruption.

Cycle Completion States and Load Safety

Load Safety and Door Access Post-Failure

Guidance on load safety and door access after a failed cycle.

Security Access and Password Entry

Entering User Passwords

Process for logging in and entering passwords.

Password Entry Screen Guide

Visual guide to password input screens.

Password and User Name Management

Changing User Passwords

Steps to change user passwords.

Changing or Adding User Names

Procedures for managing user names and roles.

CFR User Logging and Audit Functions

Initial Setup for CFR Logging

Steps for initial setup of the CFR logging system.

Adding New Users to the System

Process for adding new users to the system.

User Management and System Access Control

User Account Operations

Covers locking, logging in/out, enabling logging, amending, and deleting users.

Audit Trail System and Backup

Audit Trail System Overview

Automatic creation of password-protected audit files.

Creating Audit File Backups

Steps to back up audit files to a USB drive.

Alarms and Manual Stage Jumping

System Alarms and Fault Handling

System response to faults and alarm indication.

Safety Interlock Mechanisms

System Components and Cycles

Water Filling and Quality

Sterilisation Cycle Stages

Setting Clock Time and Date

Sterilisation Cycles Notes and Advice

Sterilising Stage Parameters and Cooling Locks

Interlocks, Sensor Problems, and Overheating

Load Sensed Timing and Cooling Locks

Maintenance and Cleaning Procedures

Safety Interlocks, Overheating, and Emergency Unlocking

Manual Unlocking Procedures

Manual Unlocking Tool Application

Maintenance Schedule and Components

Load Sensing Probes

Commissioning and Program Setting

Deriving Program Settings

Deriving program settings for intended use.

Using Temperature Recorders for Setup

Using recorders to monitor temperature during setup.

Sterilisation Parameters Factory Settings

Related product manuals