Controls
2.7
Automatic Headlamp Mode
If ambient light fades, headlamps, rear and registration plate
lamps will switch on automatically. If ambient light then
increases, headlamps, rear and registration plate lamps will
automatically go off. Automatic lamps are market specific.
The automatic headlamp function features an internal timer
that starts when the lamps are turned on. This prevents the lamps
from rapidly changing between on and off if situations where
ambient light can rapidly change, such as driving between
buildings. The headlamps may show a small delay between when
a suitable amount of ambient light is detected, and the lamps
turning off.
Steering Wheel Lamp Controls
Main Beam
Push the lamp switch (1) up to turn the main beams on. Push the
switch up again to return to dipped beam headlamps.
Flash Headlamps
Push the lamp switch down to flash the main beam headlamps.
Direction Indicators
To briefly indicate a change of direction, press the relevant
direction indicator button (2). The indicator will flash 3 times. To
latch the indicator to stay on press and hold the required
indicator button. To cancel indication press the indicator button
again or the indicator will cancel on completion of a manoeuvre.
KY9Y-19A321-AA.book Page 7 Wednesday, November 3, 2021 8:41 AM
To Next Page
Loading...
