Driving
3.19
3. Stop the vehicle (if the vehicle is not already stationary) and
fully press the brake pedal.
4. When charging is complete the launch control icon
will be shown in solid white.
5. Once charged, fully press the accelerator pedal whilst
keeping the brake pedal pressed. The launch control icon
will now turn green. To launch the vehicle, release the
brake pedal.
Once launch control is active, there will be no rise in engine
speed as initial launch is completed by the e-motor. Power from
the engine is applied once the vehicle is in motion.
Cancellation
Before a Launch: Launch control will be cancelled if the brake is
released or the throttle is pressed before the system is charged
(launch control icon is solid white). The system will also be
cancelled if Neutral (N) or Reverse (R) gears are selected.
After a Launch: Launch control can be cancelled after a launch
by:
• Pressing the brake pedal.
• Releasing the throttle pedal.
• Changing gear (if this would cause engine speed top drop
below rpm threshold).
• Selecting neutral gear.
• Pressing the launch control button.
KY9Y-19A321-AA.book Page 19 Wednesday, November 3, 2021 8:41 AM
To Next Page
Loading...
