To Next PageTo Next Page
Need help?Do you have a question about the Astralpool Dual Pure 40 and is the answer not in the manual?
General| Pool Volume | Up to 40 m³ |
|---|---|
| Light Source | LED |
| Beam Angle | 120° |
| Protection Rating | IP68 |
| Color Temperature | Cool White |
Details on power supply, weight, dimensions, CE marking, and degree of protection.
Recommended salt level, pH, stabiliser, and operating time for the electrolyser.
Specifies measurement range, control mode, accuracy, flow pump, and probe dimensions.
Instructions for fixing the support and placing the unit on the wall, ensuring accessibility.
Guides attaching the chamber to the return pipe and ensuring correct water circulation.
Instructions for placing the pH probe correctly in the salt chlorinator chamber.
Advises on flow switch installation and its operating principle to control chlorine production.
Details on mounting the earth electrode for measuring residual currents and connecting it.
Recommendations for placing the reagent tank and positioning the injector rod.
Explains connections for the unit, salt electrode, probe, and flow switch.
Provides an example diagram for wiring the unit to the filtration pump.
Illustrates the connection to the cover panel for servo-controlled functions.
Visual guide to the main interface elements and controls of the electrolyser.
Key values for salt, pH, stabiliser, operating time, water temperature, and connection.
Step-by-step guide for the initial start-up and operation of the electrolyser.
Instructions for setting and adjusting chlorine production levels, including first-time setup.
Method for analysing chlorine and considerations for indoor pools or pools with covers.
Guides on changing the polarity inversion cycle and performing self-tests.
How to check parameters like DUR, FE, INT, and perform general maintenance.
Steps to view non-modifiable parameters such as DUR, FE, INT, TPS, and TEN.
Procedures for adding salt and chemical products, including safety precautions.
Advice on preparing the unit for winter and cleaning encrusted electrodes.
Explains the meaning of the flow switch fault and production fault indicators.
Describes the function of the stand-by indicator and its meaning in the operational cycle.
Explains the importance of pH and the recommended values for water treatment.
Detailed steps for calibrating the pH probe and setting the desired pH level.
Setting injection times, understanding injection errors, and resetting the device.
Advice on turning off the device during filter maintenance and product addition.
Importance of CAT alkalinity and maintenance for the peristaltic pump.
Visual reference for pH and total hardness (TH) correlation.
Details on the warranty period, coverage, and common exclusions for the unit.
