4
Installing the appliance
Refer to the online manual for
further details about installaon
precauons and hydraulic
connecons.
Place the device on its an-vibraon feet (supplied with the device) on a stable, solid and level
surface.
Choose the location
❶
Installaon
1
• The appliance must be installed outdoors, at least 2 meters from the edge of the swimming pool.
: Front
: Back
: An-vibraon feet
View of the appliance base from below for installing the an-vibraon pads
Minimum distances
50 cm
50 cm
50 cm
2 m
50 cm
50 cm
50 cm
Evacuate the condensates Raise at least 10 cm the appliance with anti-vibration feet. Fit the two conden-
sate drainage pipes to the openings located under the appliance base.